Lycom - ST-160F - CompactFlash CF to 1.8 inch Micro SATA Drive Adapter with Housing Frame - SATA2 3Gb/s transfer rate Adapter Board with 13Pin Micro SATA (Signals and Power) male connector
Lycom - CF-102 - CFAST to 2.5 SATA Disk Bridge Board with 2.5 Frame - Best Solution that Convert Fast Speed CFAST to a low power and high performance and no noise 2.5 inch SATA Hard Drive!
Lycom - ST-308 - ST-308 - Convert IDE port (40Pin or 44Pin) to support bootable CF Card - Supports 40 and 44 pin IDE - Support CompactFlash (Type I,II) or IBM Microdrive - Transparent to the operating system and does not require any drivers - The CF card can be the primary bootable device containing the OS and application - Supports jumper for master and slave setting - Push bottom ejector on board - Powered by 4 pin floppy connector or 44 pin IDE Port
Lycom - UB-138-2 - 10Gbps USB3.1 1x USB-C + 1x USB-A 2Ports Low Profile PCIe x4 Host Adapter - Fast USB3.1 SuperSpeed+ 10Gbps 1x USB-C 1x USB-A 2Ports in Low Profile PCIe x4 Lane Host Adapter to provide USB bus high power USB-C 5V3A and USB-A 5V2A, total 5V5A power
Lycom - ST-307 - ST307 - CF to IDE 40 female pin converter - Support CompactFlash cards (Type I, II) or a IBM Microdrive - Transparent to the operating system and does not require any drivers - The CF card can be the primary boot device containing the OS and application
Lycom - ST-101L - Mini Vertical Converter Board for IDE Device to SATA MotherBoard - Attaches this Mini Dangle board to the back of all types of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO, ….) and make them become new Serial ATA Devices and meet SATA standard
Lycom - CF-108 - CFAST to 1.8 inch Micro SATA Drive Adapter with Housing Frame - Convert Fast speed CFAST to a High Performance and Low Power 1.8 inch Micro SATA Hard Drive for Netbook or Mobile use!
Lycom - ST-309 - IDE Device to USB2.0 Device converter - USB Type B upstream connector and USB 5Pin Pin header both on board - USB2.0 High transfer rate of 480Mbps - Compatible with Ultra ATA 133
Lycom - ST-307P4M - CF to IDE converter - 44 pin male - TRUE IDE mode - Directly replace 2.5 inch IDE hard drive - Supports IDE Master and Slave - Support CompactFlashTM cards (Type I) - Transparent to the operating system and does not require any drivers - The CF card can be the primary bootable device containing the OS and application
Lycom - ST-138 - ST-138 - H/W RAID Dual-CF 2.5'' SATA Flash Disk Adapter - Supports Raid 0,1 - Sata Data, Sata power and USB ports to connect to PC - Easy RAID setting through onboard Slide Switch - SATA and USB Hot-plug support - Support DMA and UDMA mode - Support two Type I and II CF - No driver required on Windows and Mac - Includes 2.5'' hard drive frame to use like a standard 2.5'' HDD
Lycom - ST-139F - Convert two SATA 2.5 inch Solid State Disks or HDDs as an Extremely High Performance and High Capacity Hardware RAID 0 Disk array that will fit into standart 3.5 inch Form Factor
Lycom - ST-307P4 - ST-307P4 - CF to IDE-44pin female converter - Supports IDE Master and Slave - Support Compact Flash cards (Type I,II) or a IBM Microdrive - Transparent to the operating system and does not require any drivers - The CF card can be the primary bootable device containing the OS and application
Lycom - CF-103 - CFAST to SATA Adapter with 3.5 inch Frame - Best Solution that Convert Fast Speed CFAST to a low power and high performance and no noise 3.5 inch SATA Hard Drive !
Lycom - ST-128 - Add 1 Special External SATA (not eSATA!!!) Port and 1 Standard Internal SATA Port on your PC System to Support Mobile storage devices to transfer over 200 cm distance - PCI interface - Fully compliant with Serial ATA 1.5G specifications - Supports 64bit / 32bit Windows Vista
Lycom - ST-106 - Mini Vertical Bridge Board for SATA Device to IDE MotherBoard - Attaches this Mini size Dangle board to the back of all types of Serial ATA Devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO, ….)and make them become IDE Device to work with IDE host Controller.
Lycom - ST123CF-i - Flash SATA Drive - Connect any CF (Compact Flash) card to SATA and use it as master/slave hard drive - Bridge Board with front Bay Bracket (floppy size, Ivory Color)
Lycom - ST-317P4M - Enable up to two CompactFlash (CF) storage cards to use TRUE IDE mode. Directly replace 2.5 inch IDE hard drive (for example: Laptop PC or Notebook PC).
Lycom - ST-137M2 - Compact Flash to 2.5 inch SATA Disk Bridge Board (With 2.5 inch HDD Frame) - Support CompactFlash cards (Type I, II) or IBM Microdrive - Transparent to the operating system and does not require any drivers - The CF card can be the primary bootable device containing the OS and application - Includes 2.5 “ hard drive frame to secure the device in your laptop - Support any size of CF memory card up to 2TB